====== Mini "Ethersex" Board ======

This article is intended to share a piece of hardware design with [[http://ethersex.de|Ethersex]] community.

This hardware is internally called MAE1061 and starts up from the [[projects:domus|domus]] project (building automation) but it has been though for the following purposes:

  * Modbus RTU - TCP converter;
  * SCADA Module (surveillance of 2 inputs, sends mail to notify changes, 1 output could be controlled);
  * ArtNet DMX Node (based on [[https://www.dmxcontrol.de/wiki/Art-Net-Node_f%C3%BCr_25_Euro|this]] article).

Definitively, it can be used for any purpose using [[http://ethersex.de|Ethersex firmware]], just check if i/o offered agree your application.
===== Features =====


  * Form factor fits in a 2-modules-width DIN box;
  * Ethernet 10Mbps (ENC28J60);
  * 1 RS485 through screw 5mm connector with optional polarization and termination;
  * 2 opto-isolated dc-input through screw 5mm connector;
  * 1 low-voltage, low-current relay output through screw 5mm connector;
  * 1 internal i/o line on a 2 pin header that can be used for a OneWire sensor, or a configuration Jumper, or other;
  * 12V power supply through screw 5mm connector.

===== Photos =====


{{:projects:domus:mae1061_1.jpg?400|}}
{{:projects:domus:mae1061_2.jpg?200|}}
{{:projects:domus:mae1061_3.jpg?200|}}
{{:projects:domus:din-ip-gwaux_1.png?100|}}
{{:projects:domus:din-ip-gwaux_2.png?100|}}

===== PCB Design files =====

 {{:projects:domus:maed1061_geda.tar|( gEDA gSchem / PCB )}}